Chromebook Setup

This is installation information if you are using a Chromebook instead of Mac or Windows.

  1. Download ‘Chromeduino 2’ From the web store. Here’s the link:
    a. https://chrome.google.com/webstore/detail/chromeduino-2/llclpgogfbmiicabgcfbndeokekmggpm

  2. Enter the “InventrKits Compilation Server” IP into the bar at the bottom and hit “connect”:

    a. http://138.197.228.112:1234/

         b. NOTE: IF THE ABOVE DOES NOT WORK, FEEL FREE TO USE ONE OF THE

PUBLICALLY AVAILABLE SERVERS LISTED ON THE STARTUP SCREEN

  1. A code editor window should appear if you are successful. Next, do the following:
    a. Under tools, select ‘Arduino/Genuino Uno’ for the board and ‘USB_Serial(/dev/ttyUSB#)’ for the port. ​(Where # is a number that corresponds to the USB port being used for the HERO board (usually 0 or 1)).

  2. You should now be able to upload it to the board.